Check that the battery is charged.

Check that the battery is installed correctly.

Check that the power switch is on.

Check that water is turned on at the control panel

Check that the clean water tank is filled with water.

Check that the suction motor is turned on on the control panel

Check that the lids on the dirty water tank are installed.

Check that the dirty water filter is clean.

Check that the squeegee is correctly mounted.

Check that the squeegee is clean and intact.

Check that the vacuum hose is clean.

Check that brushes and pad holders are correctly mounted.

Check that there is no loose dirt in front of the squeegee.

Check that the squeegee is clean and intact.

Check that the squeegee is clean.

Check that the locking pin is not stuck in the upper position.

Press the water switch on the control panel twice

1 press gives normal water flow and 2 presses gives extra water flow

Check the water flow, too little water will cause scalding floors.

Check that brushes and pads are correctly mounted.

Move the machine forward slowly for better cleaning effect